Aperion Audio
Verus V8B Bookshelf Speaker Pair
Verus V8B Bookshelf Speaker Pair
Couldn't load pickup availability
Share
Verus III V8B Bookshelf Speaker | 2-Way Design 8" Woofer
The Verus V8B bookshelf speakers are designed to compete with the best speakers available, providing excellent sound quality that audiophiles and home theater enthusiasts will appreciate.
Introducing the big brother of the APERION Verus bookshelf collection, and perfect counterpart to the bigger V8T Concert tower, we bring you the Verus III V8B Bookshelf Speakers!
For years we’ve been asked to create a bigger bookshelf speaker, and the time has finally arrived! As with all of our Verus family of speakers, the 8-inch midwoofer uses a classic Kevlar cone, which was designed and produced in-house
Top that off with the Aperion Patented 1.1" APERION "Axially Stabilized Radiator" V2 silk dome tweeter for the top end, and bada bing, we created the Verus III V8B Bookshelf Speakers.
The Verus V8B Bookshelf Speakers employs superior customized components, which include high quality thin film capacitors to provide minimum dielectric loss. Customized Aperion internal wiring with spade connectors to make upgrading a breeze, and we even went as far as customizing the PCB board with our signature Aperion red color!
Being rated at 6 Ohms and an efficiency of 88 dB, the V8B Bookshelf Speakers are easy to drive with most AVR's, and their full potential can be seen with a high quality integrated amp.
The V8B Bookshelf Speakers uses an HDF cabinet and HDF front baffle, available in either a gloss cherry veneer, or piano gloss black finish.
The HDF cabinet offers a consistent acoustic response, and the curvilinear aspect of the cabinet helps eliminate standing waves inside the chamber.
The cabinet for the Verus line naturally poses a challenge in terms of the woodwork.
The curvilinear cabinets are hard to produce, and there are many steps to make the cabinets according to Aperion's QC standard.
The painting process can be time consuming as well. While the curved cabinets are difficult to produce, the results yield a unique look.
The gloss finishes bring a furniture-grade aspect to the speaker for your living room and home theater.
Regarding the gloss cherry wood veneer cabinets - the towers and bookshelf speaker wood veneer strips are cut from the same tree, to ensure the wood grain is matched as identically as possible between each cabinet.
Before the high gloss lacquer is applied, the cabinets are stained in pairs for cherry shade consistency.
The Verus III V8B Bookshelf Speakers are designed for those seeking a full bodied sound stage as a 2-channel system, or driving your front stage or surround channels in a powerful home theater.
Particularly those looking to bring recordings to life, with excitement and presence that immerses you in a concert-like experience leaving you with the intangible feeling when music hits you.
Specification
| Frequency Response: | (+/- 3dB) 30-35,000 Hz |
| Impedance: | 6 Ohms |
| Sensitivity: | 88 dB |
| Recommended Power: | 20-150 Watts |
| Peak Power: | 300 Watts |
| Tweeter: | 1.1" Custom Aperion ASR Tweeter with ferrofluid |
| Woofer: | 8" Woven Kevlar Long-Throw Woofer and Rubber Surrounds |
| Driver Configuration: | 2-Way Bookshelf Speaker |
| Enclosure Type: | Anti-Resonant, Internally Braced, Rear Ported |
| Product Weight: | 28 Lbs / 12.7 Kgs each |
| Product Dimensions: |
W 10.6" x H 17" x D 13" W 269mm x H 433mm x D 330mm |
| Placement Location: | Front L/R Speakers |
| Shipping Weight: | 66.2 Lbs / 30 Kg |
| Shipping Dimensions: |
L 28" x W 18" x H 23" L 705mm x W 465mm x H 585mm |
Features
Patented 1.1" ASR Tweeter
|
Our design objectives required a tweeter that permits a lower crossover frequency in order to unburden the midrange cones above 2.6 kHz, where they tend to beam. To address this conundrum, we went to the drawing board with the goal of developing a tweeter with a diaphragm that resists “rocking” near its resonant frequency. By pinning the diaphragm’s center in a plane above the voice coil, it became “axially stabilized,” which minimizes unwanted distortion. The silk dome is coated in a specially developed damping compound to ensure a smooth and accurate response with controlled resonance. The refined "wishbone" waveguide has resulted in better output, with more uniform frequency response and wider dispersion across its operating range. The ferrofluid cooled voice-coil is driven by a high-energy ferrite magnet motor. |
8" Kevlar Long-Throw Woofer
| Using a 8“ woofer increases the Verus line’s power handling and dynamic range, filling the middle of the sonic spectrum. By recreating the full harmonics of a singer’s voice, the Verus Grand speakers produce vocals as rich as the Rockefellers. |
Furniture-Grade Finish
| The slim curves of the Verus line’s first-rate cabinetry make us think "supermodel"—but the primo acoustic qualities means she'd have to sound as good as she looks. The finishing touch for every Verus speaker is a high-gloss cherry-wood veneer or piano-black lacquer that’s so right for every décor, your coffee table will be jealous. |
Advanced Crossover
| Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers have also resulted in a cleaner, more open sound in the transition regions. The Verus III employs superior customized components, which include high quality thin film capacitors to provide minimum dielectric loss, customized Aperion internal wiring with spade connectors to make upgrading a breeze, and we even went as far as customizing the PCB board with an Aperion red color to represent our love of great sounding audio! |
Treble Mod
| The Treble Mod feature allows users to reduce the treble response by 3 dB. This serves as a room correction feature for people with “live” rooms that have a large amount of reflective surfaces. |
Rear Port Tube
|
A rear reflex port on the V8B bookshelf speakers reduces air-leak noise with increased bass performance. |
5-way gold-plated binding posts
| Bi-ampable is the techie way of saying you can connect one amplifier to the woofer and the other to the tweeter. Separating the low- and high-frequency wiring helps eliminate interaction, isolate power and reduce distortion. |
Custom Lightweight Magnetic Grilles
|
To protect the speaker's drivers from accidents, pets or curious fingers, the entire Verus line sports a lightweight magnetic grille which can easily be removed when you want to show off your beautiful speakers to friends and family. Note: To remove the grille, gently pinch the grille cloth at the top with your fingers and pull it outward to take it off easily. |
Key Features
- Patented 1.1" APERION® Axially Stabilized Radiator™ V2 silk dome tweeter
- One 8-inch woven Kevlar® woofer
- Aperion Customized Internal Wiring
- Aperion Customized Crossover Network
- Anti-Resonant, Internally Braced, Ultra-Thick HDF Cabinet Walls
- 2-way bass reflex design
- Bi-Ampable 5-Way Gold-Plated Binding Posts
- 12 Gauge Binding Post Straps
- Furniture-grade gloss cherry wood veneer or gloss piano black finish
- Beautifully Curved Cabinet Blends Well w/ Any Furniture & Room Design
- Acoustically transparent, magnetically held, cloth-covered grille
Package Contents:
- Verus 8B Bookshelf Speaker x Two (2) Pcs
- Manual x One (1) Pcs
- Polish Cloth x One (1) Pcs
- Gloves x Two (2) Pcs
- Rubber Bumpers x Eight (8) Pcs
Complete Your Sound System Solution
